- Building Material Making Machinery Parts[1]
- Other Construction Material Making Machinery[7]
- DC Motor[2]
- AC Motor[7]
- Other Metal Processing Machinery[10]
- Other Construction Machinery[10]
- Bending Machinery[2]
- Rammers[8]
- Power Trowel[4]
- Compactors[3]
- Concrete Saw[2]
- Metal Straightening Machinery[7]
- Pipe Making Machinery[2]
- Forklifts[2]
- Contact Person : Mr. century New
- Company Name : Changge New Century Machinery Co., Limited
- Tel : 0086-374-6119881
- Fax : 0086-374-6121221
- Address : Henan,Changge,NO.165,Renmin Road,Changge City,Henan Province,China
- Country/Region : China
- Zip : 461500
DWQJ-76 manual pipe bender
I.Scope of Application
DWQJ-76 multifunction rolling pipe bender applies to the bending of stainless pipe and the general steel pipe, square steel tube and rectangular tube, which can bend the pipe of 1-2mm into 180°-360°.
II. Structural Characteristics
The motor drives the reduction gears through the running of V-belt, and transfers to rolling axle I and II by the chain through reduction, then transfers to rolling axle III and IV through the gears. The driven axle runs with the rolling axle in operation. This machine has compact and reasonable structure, little malfunction and easy operation.
II. Attentions of Operation
1.In order to strengthen safety management, and prevent the work related injuries or deaths, the earth leakage protector must be installed before operation.
2.The ground wire must be connected after switching on the power, then choose the needed supporting mould as per requirement, and install them onto the axle I, II or axle III, IV, and then fasten the round nuts. The mould can be selected as per the pipe type to be processed, and each mould has been marked with type.
3.Start the switch after installation, then make the motor rotates clockwisely. Insert the pipe into the mould rolling groove and then slowly fasten the lead screw, and make the driven axle descend to withhold the pipe. Slowly rotate the lead screw, don't fasten the lead screw in a hurry, or it will cause the pipe to be flattened. The new needed circular measure can be reached after multiple rolling.
IV.Main Technical Parameters (See the below table)
Diameter of the Pipe | 16-76mm |
Motor Power | 2.2KW |
Motor Speed | 2880r/min |
Gear Ratio | 1:30 |
Weight | 150kg |
Packing Size | 760*610*1150mm |
( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v0/634701325_1/DWQJ_76_manual_pipe_bender.jpg' , 'http://i01.i.aliimg.com/photo/v0/634701325_2/DWQJ_76_manual_pipe_bender.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); DWQJ-76 manual pipe bender
